Ready Products
Product Documents
-
PDF Ready Products Brochure
0.9 MB
Frequently asked questions
Can I use Ready Products on old concrete?
Yes, Ready Products can be used on both new and old concrete surfaces. For old concrete, keep the surface clean and free of contaminants before applying the concrete sealer, acid wash or thinner to achieve the best results.
How do I apply Ready concrete sealers?
Applying Ready concrete sealers is straightforward. Here are the detailed steps:
- Clean the concrete surface thoroughly to remove any dirt, oil or debris. Use a pressure washer for best results, and allow the surface to dry completely.
- If using the sealer on new concrete, treat the surface with Ready Acid Wash, a popular concrete acid wash in New Zealand, to remove latence and salts. Follow the detailed instructions for applying acid wash.
- Stir the sealer well before use to ensure an even consistency.
- Use a roller or sprayer to apply the sealer evenly across the concrete surface. Apply in thin, even coats to avoid pooling and ensure thorough coverage.
- Allow the first coat to dry completely, typically for 24 hours. Avoid foot traffic on the surface during this time.
- Apply a second coat if necessary, following the same method. Allow it to dry completely.
- Let the concrete sealer cure fully before exposing the surface to heavy traffic or harsh weather conditions. This can take up to 72 hours.
By following these steps, you will achieve a durable and long-lasting finish on your concrete surfaces.
What is the best acid wash for concrete in New Zealand?
We stand behind Ready Acid Wash as the best concrete acid wash in New Zealand. Its concentrated formula effectively removes stubborn stains, efflorescence and salts, preparing concrete surfaces for optimal sealer adhesion.
What are the benefits of using Ready Thinners?
Ready Thinners are used to adjust the viscosity of sealers and other concrete treatments for easier application. These concrete thinners allow for smooth and even coverage, helping to achieve a professional finish.
Can I apply multiple coats of Ready Concrete Sealer?
Yes, applying multiple coats of Ready sealer can enhance the protection and appearance of your concrete surface. Follow the product instructions for recommended drying times between coats to ensure optimal performance.
Other Related Products
Ready Exposed
Allied Concrete's Ready Exposed uses the best quality river pebbles from around New Zealand.
Ready Glow
Allied Concrete's Ready Glow uses the most powerful glow stones in the world that are formulated to provide a long,…
Ready Colour
Allied Concrete's Ready Colour concrete range is ideal for internal floors, driveways, patios, paths and pool surrounds.
Ready Polished
Ready Polished is designed specifically for polishing and available in a wide range of colours and stone combinations.
